Little Wonder $model.subName User Manual download pdf (Page 7)

1. Bolt collector assembly to frame with 4 sets of bolts,

washer, and nuts.

2. Slide discharge over housing and mount flange with

2 sets of washers and nuts.

3. Assemble throttle control lever to handle with bolt,

washer and nut.

4. Attach throttle clips to cable and clip onto handle.

5. Connect Debris Bag to collector by hooking the hoop at

the top of the bag over the lip on the collector nearest the

engine. A “velcro” strip helps to hold the bag in position.

Position the buckle under the center of the handles. Pull the

strap to the left until the bag is tight and secure.

6. Fill engine oil as per the engine’s operating instruction

(provided).

7. Fill gasoline tank as per the engine’s operating instruction

(provided).

A. Use of Lifting Lug

Little Wonder High Performance Vac is supplied with

convenient Lifting Lug that can be used when you need to

move the unit. This Lug can hold weight up to a total of

250 lbs.

Assembly Instructions

WARNING DANGER

NEVER RUN OR OPERATE YOUR MACHINE

UNLESS DISCHARGE BAG IS ATTACHED,

AND THE INTAKE NOZZLE IS INSTALLED.

B. Put Oil in Engine Before Starting

1. Little Wonder recommends using SAE 30 Oil. The use of

multi-viscosity oil will result in high oil consumption and

possible engine damage.

2. Add gasoline to the fuel tank, and you are ready to start.

See Engine Operating & Maintenance instructions for more

detail description of type and amount of oil and gasoline used.

WARNING DANGER

HANDLE FUEL WITH CARE. IT IS HIGHLY

FLAMMABLE. FUELING A HOT ENGINE OR NEAR

AN IGNITION SOURCE CAN CAUSE A FIRE AND

RESULT IN SERIOUS PERSONAL INJURY AND/ OR

PROPERTY DAMAGE.

WARNING DANGER

DO NOT USE OR SERVICE THE UNIT WHEN IT’S

SUSPENDED FROM THE LIFTING LUG.

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

No comments

Little Wonder $model.subName User Manual Page 7