Little-wonder PRUNER User Manual

© 2006 Mantis, Div. of Schiller-Pfeiffer Inc. All Rights Reserved.Owners Manual and Safety InstructionsPruner “E” System

9Area Maintenance procedure Frequency Oiling port Inspect/CleanBefore each useNose sprocketClean/Lubricate Before each useSaw chain Inspect/Clean/S

10• A Low-kickback Chain• Low-vibration Chain• Narrow-kerf ChainFILINGTOOLS FOR FILINGSaw Chain Sharpening ProcedureSquare-Ground FilingWHO SHOULD PER

11GULLET FILINGApproximately every 5th sharpening, clean out gulletswith a 7/32" round file. File gullets from the inside out (theside opposite f

124848224433665588779955121213131111141415151616171716161818191920202121222223232525242426262727282829293030313132323333343436363737353539393838444440

KEY # DESCRIPTION PART # QTY1 GEAR CASE COVER 3331100 12 BEARING 6001-2Z 331101 13 GEAR CASE 331102 14 BEARING 627 331103 15 BOLT M5X12 331500 56 GREA

Specifications, descriptions, and illustrative material in this literature are as accurate as known at the time of publication, but are subject to cha

1Table of ContentsImportant InformationA. IntroductionThis attachment is designed for trimming light to medium sizebranches.B. Pruner Attachment Speci

2Safety and WarningsA. Safety DecalsPlease pay particular attention to the warning and informationdecals found on various parts of this Pruner Attachm

3General Safety Rules1. Remove branches in sections. Maintain safe operatingpositions, to avoid risk of being struck by falling branchesor by those th

4Extension cord chart (minimum cord gauge (AWG))17. Stay alert.Watch what you are doing. Use common sense. Do notoperate tool when you are tired, ill

51. Unscrew the mounting nut from the Gear Case Cover.Open the cover. (Picture 3)2. Mount the Chain Guide. Be sure that threaded pin fits intothe open

61. Loosen mounting nut and adjust the chain tension byturning the tensioner screw2. Hold unit vertically, and tighten mounting nut3. Move saw chain b

7Check the balance of the assembled unit. The handles andshoulder harness have been assembled at the factory and setaccording to the average size pers

8Service Maintenance GuideArea Maintenance procedure FrequencySpline male/female connection of theinner drive shaftLubricate 20-25 HrsGear caseUse a