Little-wonder 8160 User Manual download pdf (Page 10)

Manually clear the clog

E. Stopping the Engine

1. Move throttle to “slow”.

2. Push rocker switch to “off”.

3. Close fuel shut-off valve.

F. Refueling the Engine

1. Stop engine and allow it to cool for a few minutes

before refueling.

G. Transporting the Shredding TruckLoader

1. Disconnect intake hose assembly from the power unit

2. Remove boom assembly from the frame, you can

leave hose assembly attached to the chains of the

boom.

3. Remove discharge chute.

4. Place all listed above parts in the bed of the truck

and secure them with rope or hardware.

5. Before towing check safety chains for proper

attachment.

WARNING DANGER

WHEN TRANSPORTING THE SHREDDING

TRUCKLOADER, DO NOT EXCEED 30 M.P.H.!

HIGH-SPEED DRIVING AND POOR ROAD

CONDITIONS CAN CAUSE DAMAGE TO THE UNIT.

DO NOT operate unit if excessive vibration occurs; shut

engine off immediately! Remove spark plug wires and

check for damaged impeller or talon ring, loose impeller

bolt, loose impeller key, or lodged foreign objects.

C. Removing Clog in Hose

1. Fully stretch hose in a straight line (with engine

running and unit secured).

2. If hose does not clear, use “Removing Blockage

Blockage in Moving Parts” instructions below.

D. Removing Blockage in Moving Parts

WARNING DANGER

KEEP RECOIL STARTER SCREEN AND ENTIRE

ENGINE CLEAR OF ALL DEBRIS. DO NOT

OPERATE ENGINE WITH AN ACCUMULATION OF

GRASS, DIRT, LEAVES OR OTHER

COMBUSTIBLE MATERIAL NEAR MUFFLER.

WARNING DANGER

TURN OFF ENGINE BEFORE YOU DISCONNECT

HOSE, AND MAKE SURE ALL MOVING PARTS

COME TO A COMPLETE STOP.

WARNING DANGER

BE SURE THROTTLE IS IN “STOP” POSITION, AND

FAN HAS COME TO A COMPLETE STOP.

WARNING DANGER

DISCONNECT THE SPARK PLUG WIRES BEFORE

ANY CLEANING OR MAINTENANCE!

WARNING DANGER

WEAR GLOVES, THE CLOG MAY CONTAIN

SHARP MATERIALS.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Little-wonder 8160 User Manual Page 10

Comments to this Manuals