
© 2007 Little Wonder, Div. of Schiller-Pfeiffer Inc. All Rights Reserved.LITTLE WONDER® ShreddingModels 8221 and 8271
9L. Discharge Extension Kit Assembly InstructionsContents Included in Kit:1. Discharge Extension Hose (720436)2. Hose Clamp (720388)Tools Needed:
10a) Turn off the engine and wait until all moving parts have come to a complete stop.b) Disconnect the spark plug wires from the spark plugs on t
11a. Gasoline/Alcohol blends: Gasohol (up to 10% ethyl alcohol, 90% unleaded gasoline by volume) is approved as a fuel for Kohler engines. Other ga
12Maintenance:A. Removing and Replacing the Fan and Talon Ring (Figure #7)1. Disconnect the spark plug wires from the spark plugs on the engine.2. D
13B. Liner Replacement (Figure #7)1. Complete Steps 1 thru 7 found in section A (Removing and Replacing the Fan and Talon Ring).2. Unbolt and remov
14D. Heavy-Duty Air Cleaner1. Every 250 hours of operation (more often under extremely dusty or dirty conditions), replace the main paper element and
15Storage:A. Preparing for Long-Term (Two Months or More) Storage1. Clean the exterior surfaces of the unit (including engine).2. Change the Oil an
16535856295938372836333935242272321125221031315191817117410983132504945484334474442515534526364624157606140542039393412X2X2X2X10X9X2X2X10X10X4X4X410X2
Model #8221 & 8271 Part Numbers BALLOON ITEM # PART # DESCRIPTION 8221 QTY. 8271 QTY. 1 720903 22 HP KOHLER ENGINE 1 - 1 720904 27 HP
18Model #8221 & 8271 Part Numbers BALLOON ITEM # PART # DESCRIPTION 8221 QTY. 8271 QTY. 49 720258.10 FLAPPER RETAINER 1 1 50 154 5/1
1Table of Contents Important InformationA. IntroductionOn behalf of everyone at Little Wonder, we would like to thank you for your purchase of a Litt
LITTLE WONDER®DIVISION OF SCHILLER GROUNDS CARE, INC.1028 STREET ROAD, P.O. BOX 38SOUTHAMPTON, PA 18966PHONE877-596-6337•FAX215-357-8045www.little
P/N 600602Warning LabelCaution:Thrown objects.Keep bystanders away.Always wear eye, ear and breathing protection.Before performing any service or main
3General Safety Rules1. Read and understand manual.2. Wear eye, hearing, and breathing protection, proper clothing and footwear.3. While operating
4WARNING DANGERIF THE SHREDDING TRUCKLOADER IS USED IMPROPERLY OR SAFETY PRECAUTIONS ARE NOT FOLLOWED, THE USER RISKS SERIOUS INJURY TO THEMS
5B. Mounting the Shredding TruckLoader Frame (Figure #2)1. There are four holes in the TruckLoader frame deck through which the unit can be secured t
6C. Mounting the Boom Arm Assembly to the Housing Boom Column (Figure #3)1. Slide a Thrust Washer (720428) onto the shaft of the Boom Column Assembly
7Knobs previously installed.E. Changing the direction of the Discharge Chute (Figure #4)1. Loosen the Knobs (38524) by hand and, if needed, the Nut
8G. Attaching the Chain Loop Assembly to the Boom Arm Assembly (Figure #6)1. Slip the threaded end of the Chain Loop Assembly (720290) through the h
Comments to this Manuals